Innovative Products for Toolmakers, Metal Press Shops, Plastic Injection Molders and Engineering Shops

 

 

Home
Contact Us

 

Tool & Die Components:

Nitrogen Springs
DADCO Stock Lifters
Core Pin Cylinders
Ready Coil Springs
Agathon Roller Guides
Lamina Guide Sets
MDL Guide Sets
Ready Benders
Milfab Cam Units
Carbide Tools
Pivot Punches
Vlier Products
In-Die Tapping

 

Work Holding Components:

Kwiklok Pins
Spool Retainers
Adjustable Die Clamps
T-Bolts & T-Slot Bolts

 

Materials Handling:

Pax Belt Conveyors
Vibrating Conveyors
Norwalk Uncoilers
Press Unloaders

 

Lubricators:

Airless Spray Systems
Roller Systems

 

 

GW Technologies represents the Multipress range of Hydraulic Presses in Australia.

Multipress began in the early 1940s as Denison Multipress, and over the years have become known for building a rugged hydraulic press that would outlast almost anything in the plant. Today, many of these old "Denisons" are still chugging along. Not long ago, Multipress installed their 50,000th press, which says that Multipress is standing the test of time.

Contact us if you would like more information about Multipress Hydraulic Presses.

Floor Model Hydraulic Presses
20 to 200 Tons

Standard Features
  • Two models offered: FMS with Single Pump, and FMD with Double Pump
  • Adjustable pressure from 20% to 100%
  • Adjustable stroke
  • Standard NFPA cylinder
  • Vane pump mounted out of the oil for ease of service
  • Manifold mounted valves
  • Hydraulic return line oil filter
  • Speed change limit switch
  • PLC
  • Open motor
  • NEMA-12 control cabinet
  • IEC fused disconnect
  • Dual pushbuttons - anti- tiedown
  • Electric jog control for setup
  • Pressure reversal of ram. Distance reversal is an option.
[FMS/FMD Series]
 FMS/FMD Series

Accessories and Options
Positive stops - Bolster plates - Guided tool plates or platens - Index tables - Pelleting or compaction accessories - Table extensions - Bottom knockout rams - Special daylight or stroke - Safety devices and controls - Ergonomic palm buttons - Distance reversal

Bench Model Hydraulic Presses
1 to 20 Tons


W6A

W4R

M5P

Standard Features

  • Dual pushbuttons - anti-tiedown
  • Fast cycle times
  • PLC in W6A and M5P models
  • NEMA 4 enclosure - no disconnect
  • Standard NFPA cylinder
  • Pump mounted out of the oil for ease of service
  • Selector switch for jog up, jog down, run. (Hand wheel inching on Models W4R and W4T)

Accessories and Options
Positive stops - Bolster plates - Guided tool plates or platens - Index tables - Pelleting or compaction accessories - Table extensions - Bottom knockout rams - Special daylight or stroke - Safety devices and controls - Ergonomic palm buttons
 

Custom Designed Presses

Gap frame, gib-guided, 4-post, and fabricated frame presses can be furnished to suit your size, space, force, and processing requirements.

These presses are available with or without moving platens. Bottom cushions can be supplied, as well as a variety of controls and safety features. Automatic feed mechanisms can be added and sequenced into the cycle via the PLC. Manual or automated setup can be provided.


100 ton 4-post with heated platens
3-ton equipped with large dial indexer
400-ton powder compaction press

150 ton with guided upper tool plate
600-ton gib-guided
250 ton auto panel forming press
 

For enquiries, Contact GW Technologies here.


Copyright © 2012 GW Technologies Pty Ltd.
Last modified: 07/29/12

All logos, pictures and trademarks on this site are the property of their respective owners.